BPSTQ - EXTRUDED NEOPRENE PRODUCTS
- MSDS: BPSTQ
- Manufacturer: D S BROWN CO
- Product Name: EXTRUDED NEOPRENE PRODUCTS
- National Stock Number: 6850-00F025794
Product Identification
Product ID:EXTRUDED NEOPRENE PRODUCTS
MSDS Date:06/01/1989
FSC:6850
NIIN:00F025794
MSDS Number: BPSTQ
Responsible Party
NORTH BALTIMORE, OH 45870-1228
US
Emergency Phone: 419-257-3561
Info Phone: 419-257-3561
Preparer: B RUNKLE
Cage: 19779
Contractor
Telephone: 419-257-3561
Cage: 19779
Ingredients
NEOPRENE, 2 CHLORO-1, 3-BUTADIENE HOMOPOLYMER, CHLOROPRENE
CAS: 9010-98-4
RTECS: EI9640000
Fraction By Weight: 20-40%
COLUMBIA CARBON, CARBON BLACK, LAMPBLACK (SUSPECTED HUMAN
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 30-45%
OSHA PEL 3.5 MG/CUM
ACGIH TLV: 3.5 MG/CUM
ACCELERATOR
Fraction By Weight: 2-10%
OSHA PEL >2 MG/CUM
ACGIH TLV: >2 MG/CUM
OILS
Fraction By Weight: 5-15%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE EXIST FOR THE PRODUCT IN AMBIENT
STATE.
Explanation of Carcinogenicity:SEE INGREDIENTS
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. INGESTION: OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:WATER, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS,
POSSIBLE TOXIC GASES MAY NECESSITATE. REMOVE IGNITION SOURCE.
Unusual Fire/Explosion Hazard:SLIGHT CHANCE OF INITIATING FIRE. THE
PRODUCT WILL ONLY BURN WHILE IGNITION SOURCE IS PRESENT.
Accidental Release
Spill Release Procedures:TREAT AS SOLID WASTE.
Handling
Handling and Storage Precautions:STORE AWAY FROM SOURCES OF DIRECT
HEAT.
Exposure Controls
Ventilation:AS RECOMMENDED
Protective Gloves:AS RECOMMENDED
Eye Protection:SAFETY GLASSES OR GOGGLES
Work Hygienic Practices:EXERCISE RESONABLE & RESPONSIBLE CARE & CAUTION
TO PREVENT HAZARDOUS SITUATIONS.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.2-1.4
Appearance and Odor:BLACK, RUBBER LIKE, CHARACTERISTIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAME & OTHER
SOURCES OF IGNITION.
Hazardous Decomposition Products:CO, CO2.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.